How Did You Homebrew Your 360?

with freeBOOT and Cygnos
with freeBOOT and xD-card (or similar)
with XBReboot
not yet, will use freeBOOT Cygnos
not yet, will use freeBOOT xD
not yet, will use XBReboot
I won't/can't homebrew my 360

  




Crave Online


Xbox360: Xecuter Connectivity Kit v3 Lite/Pro-new/Probe/XT | 360 Repl. Cases
Cygnos 360 v2 $57 | Maximus USB Xtractor/Power Dongle/360 Xtractor/Spear
Xbox1: Xecuter3 $60 (NoSolder v1.0-5/v1.6x) | X2.6 $30 (NoSolder v1.0-5/v1.6x)
Fast & Unlimited Downloads Giganews Usenet / NDS: R4 $30 | M3 $40 | CycloDS
Open Xbox PARTII : Open the case

A normal unopened Xbox console.

 

Turn you xbox upsidedown. Under each foot you will find a screw and under 2 of the stickers there's a screw. (6 in total)
Use a Torx 20 to unscrew these.

 

Remove the "foot" to access the screw.

 

Remove serial sticker to access the screw.

 

Remove warranty/MS sticker to access screw.

 

All 6 screws are unscrewed , remove them and make sure you don't lose 'em ;)

Now lift the top on the Xboxcase.

 

There you go ... TOP is removed and you can now see the DVD-drive (left) and HDD (right).

Go to PART III : remove HDD

 

 
Giganews Newsgroups

 

Buy the X-Scene T-shirt $17.95


Supernews Newsgroups

Add X-Scene on:
Twitter
Facebook