Remove
the IDE-cable
on the
back of
the DVD-drive.
IDE-cable
removed!
There
are 2
screws
on each
side of
the DVD-drive.
Unscrew
them with
a Torx10.
Left
side screw.
Rigthside
screw.
You
can now
remove
the DVD-drive
by lifting
the tray
upwards.
If something
is blocking
, check
the frontside
of the
xbox DVD-drive
and make
sure that
small
metalic
plate
isn't
screwing
up.
Remove
the yellow
powercable.
You can
do it
with your
hands
or if
it doesn't
work ,
try with
a screwdriver.
Make sure
you don't
screw
up thought.
This powercable
is Xbox
specific
you can't
replace
it easily.
You
have now
access
to the
whole
motherboard.
You can
disconnect
the IDE-cable
from the
motherboard
too if
you want.
Go
to PART
V : Remove
motherboard
from the
case
