Tutorial written by : b-wox modmachineb-woy
Last edited: December 29, 2003

How to integrated u.s.b connectors to the front xbox panel.

Under the xbox front panel,on the left of the pad port "1".
T here is a square space,you will place them here.
I t is necessary to drill this square space.

Find connectors u.s.b and reduized it to the maximum,to put in square.

Dismount your xbox pad connectors.
R emove the shielding,look the wires colors.
Y ou must solder u.s.b wires in (except the yellow wire).

If it's ok you,after you have that :

Now reassemble the xbox pads connectors:

look,the black plastic part between the connector u.s.b (is a thickness)

now,push the unit and the black plastic thickness.

like that!!!

and after having cut the front panel you will have that :

a very simple and practical MOD.
for http://www.xbox-scene.com

Tutorial written by : b-wox modmachineb-woy