Tutorial written by : JaredC01
Last edited: February 6, 2004

1. First things first... If you are using a HUB (always) or a Router (without DCHP), you will need to download wingate for DCHP service.
2. After you have wingate downloaded and running, hook both XBox's up to the HUB/Router.
3. You MUST have Avalaunch .048 or later. EvoX will NOT work because it does not allow passive mode (PASV).
4. After you get Avalaunch .048 or later running, and your XBox's hooked up the the HUB/Router, fire up Flash FXP.
5. In Flash FXP, you will notice that the default has one side of the screen for the FTP Browser, and the other side of the screen for the Local Browser.

picture1

6. On the side of the screen with Local Browser, click on the file folder icon at the top right. Once you click on it, it should change to a globe icon.

picture2

7. After you get both sides on FTP Browser, check the IP address of both of your XBox's, and create sites for each XBox.

picture3

8. After you have the sites created, connect to one XBox on one side of the screen, and connect to the other XBox on the other side of the screen.
9. Once you have both XBox's connected, all you have to do is transfer the files!

picture4

Tutorial written by : JaredC01