Was Your 360 Banned From Live Recently (after Oct 28th)?

yes, Toshiba-Samsung drive
yes, Hitachi-LG drive
yes, BenQ drive
yes, Lite-On drive
no (modified FW)
no (unmodified FW)
don't know, stayed off LIVE

 


ModTraders Special 10% off for X-S
Official Xecuter&IntensaFIRE Reseller
coupon code 'XS10'



Crave Online


Xbox360: Xecuter Connectivity Kit v3 Lite/Pro-new/Probe/XT | 360 Repl. Cases
Cygnos 360 v2 $65 | Maximus USB Xtractor/Power Dongle/360 Xtractor/Spear
Xbox1: Xecuter3 $60 (NoSolder v1.0-5/v1.6x) | X2.6 $43 (NoSolder v1.0-5/v1.6x)
Fast & Unlimited Downloads Giganews Usenet / NDS: R4 $30 | M3 $40 | CycloDS
Xbox Version Detection

IMPORTANT: Make sure you always start this guide with STEP1
If there's a test that gives a wrong result on your xbox , please contact us asap so we can update this page. Thx.

 

LPC power/ground (v1.4 - v1.5)

There's no visual method to distinguish a v1.5 from a v1.4.
Xbox v1.5 has power and ground disconnected from LPC.
So you will have to measure if pin 2 (ground) on the LPC-bus is connected to the ground plane (a screw, for example) or not

Use a multimeter to check if pin2 (red point on images) is connected with ground (screw plate for example).
If you prefer you can also measure 3.3v (LPC pin 9) (xbox must be ON) ... it's dead on a v1.5.

*NOTE* Don't just assume you have a v1.5 because you have a new Xbox. There are very few v1.5 xboxes (we don't have exact data about this - but probably only produced on a few production lines in August 2003 (as testrun, production fault, ... we don't know). As far as we know MS produced the v1.4 again on all lines after that. Do the test above to make sure wich version you have. You most probably have a v1.4!

 

Your LPC 3.3v/ground is connected: click here
Your LPC 3.3v/ground is disconnected: click here

 

 

Giganews Newsgroups

 

Buy the X-Scene T-shirt $17.95


Supernews Newsgroups

Add X-Scene on:
Twitter
Facebook