|
Week of July 17, 2011
Dash Launch v2.23
>> cOz released a new version of Dash Launch build for JTAG 360s.
What's new/fixed:
- added hddalive
- added 13599
- relocate external files so old files will no longer be used accidentally
new path is \default.xex dir\VERSION\files
ie: GAME:\13599\patches_jasper.bin
Official Site: n/a, by cOz
Download: n/a (built with XDK)
Full Readme/NFO: xbins.org
Discuss this news item on our forums: forums.xbox-scene.com
XeLL Updater v1.2
>> Tuxuser released a new version of his homebrew application that will allow you to easily update just the XeLL part of your freeBOOT NAND. It'd been updated following fbBuild v0.32's release, and adds support for the 13599 kernel:
[QUOTE]
XeLL Updater for freeBOOT - v1.2
for Kernel 9199, 12611, 12625, 13146 and 13599
Based on dashlaunch installer by cOz
This little tool is needed to update XeLL in Flash/NAND properly. The freeBOOT/fbBuild Rebooter has a different layout compared to XBR or pure-XeLL images so the XeLL binary isn't at the beginning of a NAND Block anymore.
Using the old updslot0/updslot1-Method (which worked on XBR and XeLL Images just fine) you would render your freeBOOT console non-booting (until you reflash it externally of course).
This application however works for freeBOOT/fbBuild :) It reads the specific part of the NAND, injects the XeLL binary and writes the blocks back.
Use it on Single-NAND freeBOOT only (9199, 12611, 12625, 13146 and 13599).
[/QUOTE]
Official Site: http://libxenon.org
Download: n/a (built with XDK)
News-Source: xbins.org
Discuss this news item on our forums: forums.xbox-scene.com
fbBuild v0.32
>> fbBuild v0.32 has been released, which will allow to create a freeBOOT-style NAND image and reboot JTAG-able 360s into the latest 13599 dashboard!
What's new/fixed:
* fixed yet another bug in the ini parser (affected lhelper.xex integration)
- corrected bad block detection bug on large block dumps (nandmu)
* correct mobile dat extraction on small block dumps for big block controllers
* corrected wording (oops!) of ECD option in ini sample file
* added option to ini file to try to retain NAND MU data on big block machines
* added option to ini file to set which power-on reason starts xell when not using oldvd/nodvd
* -v messages are now automatically logged to a file regardless of specifying -v on command line
* core and ini updated to allow specifying a power reason to cause dual NAND !SWITCH command
* add 13599
Official Site: n/a (anonymous)
Download: n/a (might be illegal under DMCA/EUCD)
News-Source: xbins.org
Discuss this news item on our forums: forums.xbox-scene.com
Updatespy v13599-1
>> Zouzzz released a new version of UpdateSPY, this programs allows you to download each Microsoft update and will give detailed information about each kernel/dash update (release date, burns fuses, size, files details, ...)
What's new/fixed:
* added detected for 2 Betas
* added donwload and detection of 2.0.13599.0 with avatars
* added some thanks
Official Site/Download: By Zouzzz of gx-mod.com
Discuss this news item on our forums: forums.xbox-scene.com
Maximus Lizard360: Gecko v1.14
>> From 360lizard.com:
[QUOTE]
Have been a long day but finally we can approve Gecko 1.14 to public release. Since this is a Major Update we encourage you to update all the following:
a) Gecko 1.14 on your lizard (both application and flash)
b) Get Toolbox 1.30 from our download page
c) Get Latest Filesets from the Fileset Blog
d) Get Latest SD Card files (for standalone) from the Fileset Blog
We have implemented support for flashing the T-X pcbs but you can also use any unlocked SPI board to flash your custom firmware. We also have incorporated a Lock/Unlock option but currently works only on boards with switch (T-X boards at this moment).
As we anticipate if you already have a 0225 dummy file there YOU NEED REDUMP with this gecko 1.14, if you dont do that your drive hack will not likely work.
There is a reported bug about 0272 LTPlus 1.9 not replying back the proper real time checks, as soon as c4e fixes it we will just update the Filesets and SD card files, but meanwhile we have what is available.
Another important recomendation is to update the console Dashboard to latest 13599 before proceeding with custom hack. Be careful this update locks the 9504->0272 drives spi flash, so a good recomendation is to flash the original firmware over a board with switch (aka Team Xecuter) so once your dash is updated the board will be locked but since this board has switch you can unlock it easily and reuse on later job. To know what you need to do to update to latest dash read the following guide.
About the Russian Unlock Hack, we have seen it and we are looking to incorporate a safe and tested version on the very next Gecko update among other well appreciated goodies :)
[/QUOTE]
Official Site: http://www.360lizard.com
Discuss this news item on our forums: forums.xbox-scene.com
JungleFlasher v0.1.85 (257)
>> As always with a new C4E iXtreme release, Team Jungle also comes with a new version of JungleFlasher to add full support for the new firmwares.
What's new/fixed:
* Support for LT Plus 1.9 Liteon(slim):
-0272
-0225
-0225u (factory updated 9504 to 0225)
-0401
* Support for set Spi Lock status register on:
- XECUTER DG-16D4S UNLOCKED PCB
- XECUTER DG-16D4S PRO INSTALL KIT
* Support to extract and patch calibration data at 0x1FF80.
* In some cases 0225 may give "Play DVD" error randomly, without this data.
Official Site: http://www.jungleflasher.net
Download: here
Discuss this news item on our forums: forums.xbox-scene.com
C4E's iXtreme Slim LT+ 1.9 FULL Firmware Pack with 0225, 0401 Support
>> C4E released the iXtreme LT+ v1.9 CFW in association with Team Jungle & Team Xecuter:
[QUOTE]
C4E’s iXtreme Slim LT+ 1.9 in association with Team Jungle & Team Xecuter
World first backups for XBOX 360 Slim, no need for expensive emulators, flash fw for free!
- For all Liteon Drive models (0272 – which is an updated 9504, 0225 & 0401)
- Support for XGD3 originals
- Optimised rootkit code, ALL timings for realtime checks are same as original firmware
We have also included all the original firmwares (OFW) – as you can see there are 2 different version 0225′s too. There is a new kind of calibration data at 1FF80 that is different in 2 occurances (so far) so if you get a PLAY DVD error then you need to redump your original with the new upcoming JF and let that do its magic for you.
FYI The other variation is the factory updated version, and this difference at 1FF80 was only discovered in the last week so bear with us as there may be more variations out there.
You know if you have a factory upgraded version if the label says 9504 but the fw is 0225
Included OFW files explained:
1. Orig-0272.bin – 0272 (Retail 9504 flashed to new dash over XBL)
2. Orig-0225.bin – Retail 0225
3. Orig-0225u.bin – Retail 9504 flashed at factory to 0225u … big differences in sector 1FF00 (calibration data at 1FF80)
4. Orig-0401.bin – Retail 0401
Thanks go to Team Jungle for their hard work and efforts in the development process.
Thanks as always go to Team Xecuter for their generous support to this whole project.
Special thanks go to Foundmy.com for their help with the 0401 drives and the factory updated 0225 drives !
[/QUOTE]
Official Site: C4Eva, jungleflasher.net, team-xecuter.com
Download: n/a (might be illegal under DMCA/EUCD)
Discuss this news item on our forums: forums.xbox-scene.com
Xbox 360 System Update coming this Tuesday
>> From majornelson.com:
[QUOTE]
Sometime during the day tomorrow (Tuesday, July 19th) when you sign in to Xbox LIVE you’ll receive a prompt to accept a mandatory system update. If you are signed into LIVE already, you may be signed out and asked to accept the update and you’ll be back online in a few moments.
There are no new features that will show up once your system has been updated.
This update is preparation for additional system enhancements coming to Xbox 360 later this year.
[/QUOTE]
Discuss this news item on our forums: forums.xbox-scene.com
|
|
|
|
|
|
|
