>> From team-xecuter.com: [QUOTE] The newly formed RGH Development Team at Xecuter HQ are proud to announce that all Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719) !
Codenamed RGH 2.0, new features introduced: * Hack now works on new CB's (14717/14719 update) * Hack now works with all Refurbished Split CB's (4577, 5772, 6752) - Zephyr CB 4577, 4575 - Falcon/Opus CB 5772, 5773 - Jasper CB 6752, 6753 - Trinity (Slim) CB 9230
To confirm, we can now glitch Phats with any kernel and any bootloader. As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown !
We will be helping the J-Runner team to implement all of the new code which will allow you to build a patched ecc for any Phat NAND / Kernel / Bootloader.
The Xenon RGH hack will also be released however the quality of glitching seems to be as poor as the infamous Zephyr. No doubt once its out there users can tweak away at it and get some better results, the feeling here is that it's time wasted at the moment when we should be working on Corona. Currently it's a "repair" method at best to rescue DVD keys.
This is a new style of RGH hack (hence RGH 2.0) and there will be a new JED file, changes to the CoolRunner design, changes to the QSB's and possibly new install methods (we'll also show you how to change your older version TX CoolRunner to be compatible with the new hack, and initial tests have shown that other cheaper versions of RGH hardware will not work at all).
Work on fine tuning the hack is currently ongoing to make it as solid as possible, however we hope to have everything ready asap.
Members of our team are also working hard on the new Slim Corona model and can tell you that great progress has made made there too. We'll just say that we feel bad for anyone who paid good money for any glitch mod that was advertised as being "Corona Ready".
Stay tuned for more news :)
Thanks to Tiros & GliGli for their initial work on the RGH hack. Without them none of this would have been possible. [/QUOTE]
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:56 EST) - (Category: Xbox360) - (Posted by::
)
Xecuter DemoN Official Product Description / Specs
>> From team-xecuter.com: [QUOTE] The Xecuter DemoN is the most advanced Xbox 360 NAND device ever created. Phat Version (left) - Slim Version (right)
Giving you the ability to have dual NAND's is nothing new to the scene thanks to Team Cygnos and their dual NAND device for older generation Phat JTAG models. However since the advent of the Reset Glitch Hack (RGH) scene, there has been an insurgence of homebrew activity on all the newer models of Xbox 360, including all of the Phat consoles that could no longer be JTAG'd, giving a need for multiple NAND's yet again so you can run your own custom kernels and linux apps on all the latest models including the new Xbox 360 S (or Slim as its known).
Picking up where Cygnos left off, Xecuter has taken the Dual NAND design and basically fixed every known bug and flaw that existed with the Cygnos, improved features, increased r/w speeds, redesigned the layout and install methods, added new functions and basically took the dual NAND concept to the next level.
The built-in NAND R/W hardware is a stand out feature. Completely bypassing the need for any external device such as the Xecuter NAND-X or any other SPI tool, the DemoN has a USB port which offers a completely pass-thru solution giving you direct access to the Demon & On-board NAND's and with the turbo mode, you can now achieve NAND r/w speeds that have never been seen before on the Xbox.
Xecuter hasn't forgotten JTAG fans either, there are thousands upon thousands of users out there who run a perfectly functioning JTAG machine many of them using the Xecuter JTAG QSB Install Kits that have become so popular over the last couple of years. Not only does the DemoN support all of the latest RGH devices such as the Xecuter CoolRunner but we have also designed the DemoN to make sure that it doesn't affect any current JTAG installs which is ideal for those who have the QSB kits installed and working perfectly fitting the Demon does not require that they have to remove their functioning JTAG feature. The DemoN will also work with your currently installed RGH Device especially the TX CoolRunner and it's QSB install kits. Xecuter thinks of the customer experience first and foremost !
As always with Team Xecuter you can trust that we make the absolute best quality devices paying attention to the tiniest details and making sure that the end user is completely confident in a premium product backed by our famous warranty.
Xecuter is the brand you can trust, don't accept poor imitations.
Main Features: * NextGen Dual NAND Device * Easy Switch Between Stock Onboard NAND and Custom NAND * Easy QSB Solution (Quick Solder Board) * Easy Wire Install Option Also Available * Both Phat & Slim Versions * Support 16MB & 256MB / 512MB (Big Block) NAND Versions * Original Brand NAND to Match Stock For Security & Compatibility * Built-In USB NAND Read/Write Hardware (NAND-X / Other SPI Hardware Not Required) * Turbo NAND R/W Mode (16MB Dump less than 20 seconds) * TX CoolRunner Options * Supports Phat JTAG Installs (Inc All TX QSB JTAG Kits) * Supports Phat & Slim RGH Installs (Inc TX CoolRunner QSB Kits) * No Lifting of CE Pin on Both Phat & Slim * No Trace Cuts on Both Phat & Slim * Custom Software & Drivers * 100% J-Runner Support * Proven Xecuter Build Quality & Warranty * More Premium Features Will Be Announced Very Soon
Dev versions of the DemoN will be shipped to all of Xecuter's newly created RGH Development Team as well as members of Freeboot, FreestyleDash and other prominent developers in order to enhance the abilities of the DemoN and to make sure it is as fine tuned as possible by the very guys who bring you all of your homebrew goodness.
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:48 EST) - (Category: Xbox360) - (Posted by::
)
360 Multi Builder v0.82
>> Rogero released a new version of 360 Multi Builder - an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images
What's new/fixed (since v0.80): - Added Support for building images of latest Dash ver 2.0.14719 - Updated Dashlaunch to latest version 2.31 - Added the updated bootloaders for building 14719 Retail Images. * Please note that Retail Images may need to increment "CF LDV" value by 1 of the original value manually from the options.ini file. - Updated the Instruction Page with additional details. - Bug Fix only for Retail image building (Dual-Boot users), other functions are not affected. (v0.82)
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:40 EST) - (Category: Xbox360) - (Posted by::
)
xeBuild GUI v2.01
>> Swizzy released a new version of his GUI for xeBuild, adding support for the new version and more ...
What's new/fixed: - Fixed: Updated the hardcoded MD5 hashes for critical files that were included at release, forgot to update those prior to 2.0 FINAL release :$ - Updated: Dashfiles.xml now also includes 14717 dashfiles link and MD5 hash, they weren't uploaded prior to release, thus i couldn't link to them ;) - Fixed: The app would crash when trying to copy stuff from Manual tab in xeBuild (or paste, or anything else like that) not anymore ;) - Changed: CFLDV is now included every time you build a non-ECC nand image (Retail, Glitch, Freeboot, Devkit) if you've entered it manually... - Fixed: The SMC Failsafe should no longer force you to answer stupid questions about what SMC to use (if you've already selected it) - Fixed: You can now properly select if you want to use Simple or Advanced mode when autostarting or loading settings... - Fixed: The app now loads options.ini properly, and if it exists next to the executable it'll also load it properly as if you had pressed the button to load it... ** NOTE: If this file exists it both implies that you are an advanced user and want to use these settings, thus it'll automatically use these settings for you... ** - Added: The app now loads launch.ini aswell instead of just using it... - Changed: When saving settings the app will now default to "default.xml" and the App directory, allowing you to quickly select alot of presets that you want it to have when loading the app :) - Fixed: I've fixed the ini's for 14717 so they are proper now... - Changed: The debug log that is created when there is an error with the build process (after running throught all the failsafes) will now also include xebuild's verbose log... - Changed: 14719 is now also included! :) - Changed: Dashlaunch 2.31 is now the used version... - Fixed: Bug with xeBuild Custom settings, i was apparently tired when i made that functions :P fanspeed?! there is no such setting, it's gpufan/cpufan! - Changed: I'm no longer downloading files from logic-sunrise, instead i've got a dedicated host for all files (giving me more control!)
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:35 EST) - (Category: Xbox360) - (Posted by::
)
Dash Launch v2.31
>> cOz released a new version of Dash Launch build for XDK-homebrew RGH/JTAG 360s.
What's new/fixed: * revert contpatch to older form * signnotice now defaults to FALSE/disabled * signnotice option should no longer wind up in network troubleshooter on 14717+ * add 14719
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:29 EST) - (Category: Xbox360) - (Posted by::
)
Xebuild v1.01 update 1
>> Team xeBuild released a new version of xeBuild (a single application for building glitch, jtag and clean retail images) adding support for the 14719 kernel.
What's new/fixed: * fixes a bug with ini creator, wasn't outputting non CB/CD bl data * add 14719 * erm... updated "security"
Official Site: n/a (by 'Team xeBuild') Download: n/a (might be illegal under DMCA/EUCD) News-Source: xbins.org
Discuss this news item on our forums: forums.xbox-scene.com
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:26 EST) - (Category: Xbox360) - (Posted by::
)
Team Xecuter J-Runner v0.1 Beta
>> From team-xecuter.com: [QUOTE] Without a doubt this is the best JTAG/RGH App we have ever used Team Xecuter
J-Runner v0.1 Beta J-Runner is a simple all-in-one application that integrates with Xebuild to read/create and write xbox 360 nand images for the reset glitch and Jtag hack. It has been developed with the end user in mind to make the entire process intuitive, simple and seamless from start to finish.
Integrated features: * CPU Key functions Get key over http and integrated cpu key database * DashLaunch ini Creator * Automated file save feature saves files from each console to a folder based on console serial * Automatic Remapping of bad blocks before creating ECC image (first 50 blocks) * Integrated image building functions with no reliance on python * Read, write and compare nand images independent of nandpro * Automated update notification always have the latest version, when available (requires Internet connection) * Patch nand (change DVD Key, Drive OSIG and region) * Manually alter Lock Down Values (LDV for Xebuild use) * And lots more to find out
To do: * Finish adding lpt support for flashing coolrunner and reading/writing nand * add full 14717 support for slims/phats * add Jasper 6752 CB_B Support
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:23 EST) - (Category: Xbox360) - (Posted by::
)
Team Infinity Matrix Trident - Triple NAND Solution
>> From infinitymod.com: [QUOTE] We are proud to announce the MATRIX TRIDENT (PSI), the first TRIPLE NAND solution available for Xbox360.
The TRIDENT will transform your Xbox360 16 MB NAND in 3 independent 16 MB banks that can be read and write with any available SPI reader/writer solution using software tools like Nandpro 2.0 and Nandpro 3.0. The trident can work together with any Glitcher solution present in the market. A flat cable is supplied to directly connect it to the Matrix GLitcher II, for enhanced performances. It features a quick solder board solution for the Trinity slim and an external switch with led indicators to quickly choose which one of the THREE banks of NAND to use. With the Matrix Trident you can assign one bank to the Original NAND, the second bank to boot a modified dashboard and the third NAND bank to boot Xell or a second dashboard. Whether you use it for fun or for hacking purposes, the Trident is going to be the tool of choice to add extra NAND capacity to your Xbox360.
FEATURES: - Allows for the use of 3 Independent banks of NAND on the Xbox 360. - No need to cut any tracks on the Xbox360 motherboard. - Extenal switch to quickly change among the 3 NANDs - Compatible with every glitching solution present in the market, including Matrix Glitcher II. - Compatible with any xbox360 with 16 MB NAND. - Easy to install thanks to quicksolder point design. - Blocks can be read / write with any SPI hardware present in the market. - Compatible with Nandpro 2.0 and 3.0 software.
Installation Diagram for SLIM Xbox360 is already available in the DOWNLOAD section of the website. Other models diagram will be uploaded in few hours. A complete installation Tutorial and usage for the MATRIX TRIDENT will be online by tomorrow.
Finally an announcement for console owners that had the RGH feature disabled due to recent 14717 dashboard upgrade:
FAT Xbox360: A new solution to re-enable RGH and Trident Style additional NAND on Fat consoles is under advanced development.
SLIM Xbox360: A working solution is already under test and we will release it right after completing all the needed tests. Fortunately, due to hardware difference, the changes on Slim were not drastically as the one implemented on the Fat. [/QUOTE]
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Saturday 25 February 2012 21:17 EST) - (Category: Xbox360) - (Posted by::
)
360 Multi Builder v0.8
>> Rogero released a new version of 360 Multi Builder - an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images
What's new/fixed: - Removed the CB Labels on Main Menu to eliminate any RGH/Jtag confusion. - Updated xeBuild to v1.01 with support for Dashboard 14717. - Updated Dashlaunch to latest version 2.30 - Updated Rawflash to v4 (xenon.elf in folder ..\Data) for better Flashing. - Updated Xell-Reloaded to Xell Reloaded v0.991 with built in RawFlash v4. - Updated Flashing Instruction for proper operations with RawFlash. - FreeStyle Dash is set to boot as the Default Dash with default "launch.ini"
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Wednesday 22 February 2012 23:53 EST) - (Category: Xbox360) - (Posted by::
)
AutoGG 0.2.9f RC4
>> blaKCat released AutoGG 0.2.9f RC4 adding new support for the latest version of xeBuild and Dash Launch.
The AutogGG is a program that helps you to: - Read the Nand of the Xbox. Autodetect the model. - Generate Nand to load Xell in console to obtain Cpukey. - Once you have CpuKey.Generate Jtag / rgh (Glitch) / Retail, images - Flash generated Nand through programmer (LPT/USB) or software (Xell or Dash)
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Tuesday 21 February 2012 23:24 EST) - (Category: Xbox360) - (Posted by::
)
New FBANext WIP
>> From lantus360.com: [QUOTE] Its been a while since my last post here. I dont seem to have as much time these days as i used to. Some good news is that ive been working on FBANext. I have intergrated the codebase with the Win32 0.2.97.21 and have SVN access into the repository so i can keep updated much easier going forward. Big thanks to the FBAlpha devs for this!
0.2.97.21 gives us many many new features since the Beta 2.2 build including: * PC Engine TG16 Driver * NeoGeo CD Driver * NeoGeo MVS Slot loader * Irem drivers * DataEast drivers * Toaplan sound fixes * many new drivers added
Here is a new WIP video of new FBANext demonstrating NeoGeo MVS Slot loader and NeoGeo CD emulation [/QUOTE]
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Tuesday 21 February 2012 23:00 EST) - (Category: Xbox360) - (Posted by::
)
xeBuild GUI v2.0 FINAL
>> Swizzy released a new version of his GUI for xeBuild.
What's new/fixed: - Fixed: There was a minor error with my new Fuse parsing, in some cases it would skip some 0's not anymore ;) - Changed: You can now select seperate names for bin/ecc, previous configurations can still be loaded (and will be checked if it's .bin or .ecc and write the names into the appropiate place) - Added: Failsafe for motherboard choices, if you select a motherboard that doesn't match the suggestion from the app it'll warn you about it, and ask if you want to correct it (use suggestion) or if you want to continue... ** NOTE: If it cannot determine what motherboard to suggest it'll just ignore it as it can't really check anything ;) ** - Added: Failsafe for image type, it'll check if ecc/glitch/freeboot is the appropiate image type for your motherboard (based on CB) if it can't check it'll ignore it (same as motherboard) - Fixed: The app no longer tells you that the input is to short whiles you are writing the cpukey... - Fixed: The app can now build retail images even if you don't have a SMC.bin file in the root directory of the app :) - Fixed: The app no longer includes Dashlaunch when NOT building Glitch/JTAG images... - Added: You now have a option to use Current SMC (meaning the app will not replace it, useful if you don't know what you should use or just don't want to replace it) ** NOTE: You'll need to select Current/Retail SMC if your SMC is patched, otherwise it won't work... ** - Changed: Building Retail/Devkit images now also requires you to choose Current/Retail SMC in order to be valid - Fixed: The app no longer crashes when trying to download an invalid link (it'll tell you there was an error whiles trying to initalize the download) - Fixed: If your download fails when downloading dashfiles the app will no longer try to install after download (as it has failed!) - Changed: The app now uses Dashlaunch 2.30 - Added: New options available since Dashlaunch 2.30 :) - Changed: The app now includes files for creating 2.0.14717.0 - Changed: The app now uses xeBuild 1.01 along with all of the new patches... - Fixed: Minor bugs a little bit here and there, none really fatal/worth mentioning (most are basicly things i missed adding in for certain parts of the automation stuff) - Added: Xell Failsafe, it'll automatically change Xell to Xell-reloaded if you've selected custom and it cannot find the file, it'll also do the same if you've previously selected JTAG type (unlocking Xell and Xellous) and having it fixed to Glitch type - Added: SMC Failsafe when selecting JTAG (Freeboot), this will ask you what SMC you want to use, if you select JTAG (Freeboot) first then change it during earlier failsafes it'll set it to current automatically... (this feature also allows you to change the settings by spamming you with questions untill you answer yes to any question...) - Changed: The app now uses Xell-Reloaded built 2012-02-19 (v0.991)
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Tuesday 21 February 2012 22:55 EST) - (Category: Xbox360) - (Posted by::
)
Dash Launch v2.30
>> cOz released a new version of Dash Launch build for XDK-homebrew RGH/JTAG 360s.
What's new/fixed: * fixed uart debug output 0xD 0xA instead of 0xA 0xD * STOP code 0x2B can now output stack info * xex header revoke check (requires live to download revoke list) flag now ignored (hv and xam patch) * add 14717
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Tuesday 21 February 2012 22:49 EST) - (Category: Xbox360) - (Posted by::
)
xeBuild v1.01
>> Team xeBuild released a new version of xeBuild (a single application for building glitch, jtag and clean retail images) adding support for the 14717 kernel.
What's new/fixed: * adds 14717 * trinity CB_B patches updated to allow glitch image booting on official 14717 updated slims, requires having CPU key before building image. Updated fats will likely require new CPLD timing, if you wish to continue to glitch a fat for the time being it's advised to not apply any update ] 14699. * included xells updated to xell reloaded v0.991 built 2012-02-19. See xell_info folder for usage info and changelog, or find newer builds at libxenon.org -note that for xebuild, jtag images use xell-2f not xell-1f * added devkit image building (WIP, see info below) * added bigffs jasper type (see info below) * added a small helper app, ini_creator.exe that will create a basic .ini file with crcs for xebuild when batches of files are dropped onto it, ready for sorting * bug fixes
Full Change log: - minor bugs fixed (extended.bin, kiosk button not displaying) - invalid secdata.bin and extended.bin will be cleanly recreated instead of failing build - can now accept decrypted kv.bin without messing it up - fixed a bug with long version strings in firmware .ini files - fixed fatal exception when patch file is not found - added -i flag to specify additional addon component for ini/patch file name - corrected nandmu warning to only say xebuild will attempt to keep this data when the option is set - added additional jasper build mode jasperbigffs, results in a non-standard and much larger system file area (approx 32MiB larger) - patch slot address for glitch/retail images is now dynamically assigned (first block after xell/first block after CE) - devkit image building added - if pairing value can't be found in dump CF/CG it will attempt to be extracted from CB - smc size and address made dynamic (mainly for corona+) - corrected typo/problem with FAT bitmap creation - cache decrypted keyvault, refine messages regarding FCRT and output dvdkey at the end - logs/outputs expected/possible fuse values for console sequence bytes in CB - add dvdkey to ini and -o, to set dvd key in keyvault before writing it to the new image - fixed a possibly critical bug when parsing nanddump.bin FS entry - correct EU/AUS smc game region output - nanddump flash controller detect recoded, now only requires block 0 be not remapped - fixed unhandled exception when -o option that requires = did not have = - updated bl patches for all jtag machines and trinity (rgh fat doesn't need) to remove smc size = 0x3000 limit - fixed bug that was causing 2nd patch slot on retail builds to contain unneeded data - added fuse mask output while processing CB - added 14717 - added patch to trinity 9188 CB_B to bypass fuseline 2 revocation check
Official Site: n/a (by 'Team xeBuild') Download: n/a (might be illegal under DMCA/EUCD) News-Source: xbins.org
Discuss this news item on our forums: forums.xbox-scene.com
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Tuesday 21 February 2012 22:47 EST) - (Category: Xbox360) - (Posted by::
)
BoxZii Module 2 Beta 11 FW
>> The BoxZii team released a new firmware for the 'Module2' of their ODD Emulator device.
What's new/fixed: * Added Standard C4EVA XGD3/XGD2 profiles autopatching * Added AUTOBOOT function * Added new background
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Sunday 19 February 2012 22:32 EST) - (Category: Xbox360) - (Posted by::
)
XeLL Reloaded v0.991
>> [cOz], Cancerous1, Ced2911, GliGli, Juvenal, Natelx, Redline99, sk1080 AND Tuxuser are proud to release a new official version of XeLL-Reloaded.
What's new/fixed: * Fixing booting of Linux Kernel on Reset Glitch Hack Consoles ! * Write stackdump on fail to screen * additional offsets for reloading XeLL/updating XeLL-Reloaded * integrated cOz's rawflash application (look at README) * probably fixing freezing at "Reinit PHY..." * kboot.conf parsing (shows a menu inside XeLL, loads linux and homebrew elfs - look at README) * Fixing TFTP ACK on end of file * Fixing TFTP transfer for files with only 1 DATA block * Fixing possible buffer overflow when uncompressing gzipped file * dcbst the memory-range for Devtree and Initrd
