Swizzy has released a new app dedicated to JTAG/RGH XBOX 360 consoles. This one will assure you have a valid NAND dump.
x360 NAND Dump Checker by Swizzy, allows you to check each page of your Xbox 360 NAND dump for ECC errors...
[QUOTE] It does this by calculating the ECC data and comparing it to the one stored in spare. It'll tell you if it finds what it believes to be a badblock (if there is no ECC data stored in spare it'll assume it's a badblock).
Includes GUI and command line version of the tool along with source code. Requirements: Microsoft .NET Framework 2.0 or later. [/QUOTE]
Information:
[QUOTE] Verbosity level 0 = Normal, default level, only prints badblock info for each block and most errors/warnings Verbosity level 1 = Medium, prints all bad pages and all errors/warnings Verbosity level 2 = Full, prints ECC information for each page bad, and page status… Verbosity level 3 = Debug, prints information of each page and more… [/QUOTE]
That's right, there are two versions a CLI (Command Line Interface) and a GUI one.
[QUOTE] CLI version:
Usage:
dumpchecker file [switch [switch]...]
Example: dumpchecker flashdmp.bin -full -v 1
Switches: -full : Check ALL pages of the nand (only for 256/512MB Jaspers) -noenter : Suppresses prompt for enter key when finnished -v : Set verbosity level, valid levels: 0, 1, 2 and 3 -? : Shows this information [/QUOTE]
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Tuesday 24 July 2012 10:25 EST) - (Category: Xbox360) - (Posted by::
)
Squirter.exe Source Code released by the Squirt360 Team
>> SW that allows the reading/writting of the X360 NAND with the FTDI chip.
The Squirt360 Team has released the Source Code for their NAND Dumper module and application. Full details inside!
The Squirt360 Team has released the full Source Code and Datasheet of SQUIRTER.EXE, the Xbox 360 NAND dumper based on a FTDI chip.
Check out their official statement:
[QUOTE] Dear Users,
Today we like to share with the community the source code of SQUIRTER.EXE, the software that allow the reading / writting of the X360 NAND with the FTDI SQUIRTER PROGRAMMER.
Is important to note that SQUIRTER PROGRAMMER doesn't use any "proprietary" IC, The FT2232H is FTDI’s 5th generation of USB devices. The FT2232H is a USB 2.0 High Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.
Here the DATASHEET: http://www.squirt360.com/downloads/FT2232HQ-R-FTDI.pdf
Here the SQUIRT PROGRAMMER schematic and PCB layout (very important to understand where we connected all the I/O of FTDI chip) http://www.squirt360.com/downloads/S...RAMMER-PCB.pdf
With this preamble is clear that FTDI IC is a nice platform to develop new nices tools for the community (POST BUS SNIFFER, PARALLEL PROGRAMMER / READER) etc... We hope that our source code is a good point to start to show developer how to use this nice cheaper device.
Important notes on the source code:
• The commands to manage the SPI communication was developed looking on the "clone" of NANDPRO that work on a PIC IC https://github.com/gligli/tools/tree/master/picflash • The recognize of the TYPE of the NAND FLASH and the ECC algorithm was taken here: http://code.google.com/p/freestyleda...c=svn172&r=172 • Some parts of the code include examples provided from FTDI to improve the communication speed • All the documentation of FTDI component used in our SQUIRTER project can be found here http://www.ftdichip.com/Products/ICs/FT232H.htm [/QUOTE]
So, there you go. Download the full SOURCE CODE & LICENSE from HERE!
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Monday 23 July 2012 16:45 EST) - (Category: Xbox360) - (Posted by::
)
360mpGui v1.0.2.3 BETA released
>> Xbox 360 Multi-function Tool for Windows.
With this tool, you can extract and create ISOs. It also includes a DLC Patcher, Title-ID, Media-ID Manager and a Title Update searcher/downloader.
360mpGui by ichunddu is a pretty neat Xbox 360 Multi-function Tool for Windows which allows you to extract and create ISOs.
It also includes a DLC Patcher, a Title-ID and Media-ID Manager, a Title Update searcher/downloader and its own ABGX360 GUI interface.
Well, a new version has been released. Here's the changelog for v1.0.2.3 BETA:
[QUOTE] Last Update: 15.07.2012 Fix small Things and add a Startpic/new Icon (Thx to MaxDaMi from BoerseBZ for GFX)
Previous Updates: 10.07.2012 CPU goes up to 50% in Task Manager - fixed 07.07.2012 More ISO-Info to Extract-ISO Screen added 07.07.2012 Batch-Mode for Extract-ISO added 01.07.2012 Update to 1.0.1.2 (Fix Bugs) 29.06.2012 Abgx360-Gui added
26.06.2012 First Release of 360mpGui [/QUOTE]
See our 'forum thread' for more screenshots and other info!
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Monday 23 July 2012 16:39 EST) - (Category: Xbox360) - (Posted by::
)
Team Matrix releases Corona upgrade package
>> Now all owners of their 'Glitcher II' product will be able to use RGH on Corona Xbox 360 consoles.
Matrix developers have released an new firmware and diagrams for Corona 16mb users, and stay tuned for 4GB support soon...
[QUOTE] July 16, 2012
Corona 16Mb Firmware and upgrade diagram for Glitcher II is available!
We are happy to release a Firmware upgrade and diagram to enable every Matrix Glitcher II ever produced to work with the Corona 16MB.
We are now working on the Corona 4 GB and hope to have something ready in few weeks.
The upgrade Firmware V1.5 and installation diagram for the Corona 16 Mb is now available in the DOWNLOAD area of our website or you can download the complete ZIP package HERE. [/QUOTE]
