>> Rogero released a new version of 360 Multi Builder - an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images
What's new/fixed: * Added Proper Support for Jasper with CB 6751 (where a donor CB 6750 will be used) * Please note that Jasper with CB 6752 are not Glitchable even if the image was created * Added Proper Support for Zephyr with CB 4578 (Program now supports both 4578 & 4579) * Added a notification to the Python Script about the Falcon CB 5772 being not Glitchable
Spread News: PermaLink
| Add us on: Twitter - Facebook - RSS
(Thursday 03 November 2011 14:08 EST) - (Category: Xbox360) - (Posted by::
Boot timing optimisation for Slim 360: XBH, x360glitchip, Matrix Glitcher
>> Several Reset Glitch Hack (RGH) chips have released released information about optimisation of boot time on the Slim 360 consoles based on research on XBH by "ameel" and others.
From infinitymod.com: [QUOTE] A very smart guy who goes by the nick “ameel” discovered an interesting and unusual solution to the unreliable boot times problem that all current glitching solutions suffer from on slim Xbox 360s. The problem with glitching slim consoles resides in the need to send a glitch signal with some very precise parameters that are hard to control on the simple XC2C64A cpld, especially due to the higher clock frequency and the currently used injection point. Increasing the wire length "fixes" this problem probably due to the added distortion, ringing, etc. that is added to the glitching signal. This will have to be analyzed in more details with the right equipment. For the moment being, what's important is that it's a possible fix that many people seems to be very happy with, so we give our warm congratulations to “ameel” for this ingenuous solution! Original thread available here For everyone installing a Matrix Glicher in a Slim Xbox360, simply make the wire for PAD A of a length of between 25-30 cm. Everything else is unchanged. [/QUOTE]
From x360glitchip.com: [QUOTE] Thanks to tests made by great members of xboxhacker, we are able to bring you today a boot timing optimisation for Xbox Slim. Indeed, even if on FAT boots are in instant, on Slim its were very random. The average of boots on Slim was about 30s to 50s on our great x360glitchip, but could take longer (2min) on few xbox. With this optimisation, very simple, the boot on Slim goes down around 10s, and this at each boot. You need for this, a AWG-30 wire of exactly 32cm, which will put between Point A of our x360Glitchip and the CPU_RST point under the motherboard. (This is the original installation point, only the lenght of the wire changes). This optimisation, which could seem too simple, brings you amazing results. It's done, you are ready for a perfect Glitch now. [/QUOTE]
>> Rogero released 360 Multi Builder v0.1: [QUOTE] PS3 Developer Rogero and Tortuga-Cove Resident Has released an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images called "360 Multi Builder", check out the details below:
360_Multi_Builder_v0.1 on 31/10/2011 - Updated "Easy ggBuilder" to "360 Multi Builder" with ECC/Jtag/Glitch & Retail image creation. - Added Auto-Build ECC Glitch image "image_00000000.ecc" when "cpukey.txt" is missing. - Added startup checks for "nanddump.bin" and "cpukey.txt" files existence. - Jtag/Freeboot 13604 image creation with built-in Dashlaunch v2.25 patches & Xell-Reloaded. - Glitch Hack 13604 image creation with built-in Dashlaunch v2.25 patches & Xell-Reloaded.
Credits to ggbuild/fbbuild/freeboot/360FlashTool & Dashlaunch teams and devs. Credits and big thanks to BestPig for sharing his awesome fcrt_extractor.exe program. [/QUOTE]
>> We received this email from Matrix Team: [QUOTE] Matrix Team is proud to announce the availability this week, of our new product: Matrix Freedom PCB. Large quantities are available, all orders will be shipped immediately!
Features: - Fits all Liteon DG-16D4S Drives - Fully compatible with 9504, 0225 and 0401 fw revision. - Supplied with external programmer to enable/disable write protect and reflash firmware. No need to open again the DVD or the Xbox360 once installed. - An easy and simple swap out system for the original DVD board. - Easily programmable using any SATA programming tool. - Fully compatible with Jungleflasher software.
>> From xk3y.com: [QUOTE] Quick update on the xk3y wifi Dongle and Web Interfaces.
xk3y WiFi is a wireless B/G/N USB dongle that unlocks the full potential of the powerful xk3y Linux system. The xk3y web interface provides seamless integration with any device with a browser and WiFi, such as iOS and Android smart phones and tablets, PCs, and more.
The xk3y WiFi comes with a default web interface but it also opens up access to the xk3y API, making it possible to create homebrew apps for controlling xk3y! This is where xk3y WiFi will really flourish.
We have started the Pre-Orders to our Distributors/Resellers and they should soon list the xk3y WiFi dongle for pre-order as well.
Here is another short demo video from Mr_Waffle showing of xk3y wifi, using a gallery script to make a Cover Slide menu system. [/QUOTE]