|
Back to the news-page
Xecuter Xapt3r Sample
>> Here are some pictures of the Xecuter Xapt3r Solderless Adapter we received from divineo.com/divineo.co.uk/divineo.cn.
The Xapt3r is a 'no-solder' adapter for the Xecuter3(CE) modchip (with the additional row of LPC pogopins the X3 requires), but it will also work with the Xecuter 2.6(CE). The adapter will allow you to install these modchips without requiring any soldering on Xbox v1.0 - v1.5. It uses pogopins for all the LPC points and a springwire for the 'D0' point.
The adapter is a well-designed new plastic mold with several blue LEDs inside that will shine when your xbox is powered.
The Xapt3r is not using a simple screw, but a 2-parts screw instead. So basicly you first screw part1 in the motherboard hole near the LPC points, then you can already fit the Xapt3r onto the pin of part1 and this will still give you enough room to move the adapter and put the LPC pogos and springwire on the right place. When that's done you can screw the 2nd part that will very firmly fix the Xapt3r - so it won't move and stay stable.
You also get 'rivets' in the package, that you can optionally put inside the LPC points prior installation - it will result in better contact between the LPC points and Xapt3r pogopins.
A more detailed review about this adapter will follow soon.
More Pictures:
* Xapt3r in its package (High Definition)
* Top view of the Xapt3r (High Definition)
* Bottom view of the Xapt3r (High Definition)
Back to the news-page
| |
|
|
|
|
|
XboxMediaCenter at
|
