|
Back to the news-page
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
>> carranzafp/Maximus released a modified version of the Lite-On iXtreme v1.6 to work with the 83850-v2 and 93450 drives:
[QUOTE]
Just finished hexediting and testing
Here are templates for Ixtreme 1.6 for 83V2 and 93450 liteon firmwares
what you need to do is place your keys/serials on it and flash
use Jungleflasher or Hexedit, whatever, keep you original stored for future upgrades
Dont ask why you got banned if you play Online with this firmware, its 1.6, also I just tested with 2 consoles so its your call
the fws are based on the 83v1 ixtreme 1.6 I could have do it based on the 74 but Its the first I saw, dont think based on the 74 would make them safer anyway
[/QUOTE]
Download: n/a (might be illegal under DMCA/EUCD)
News-Source: carranzafp on XBH
In related news, MRA released a new and better method to dump/read those Lite-On 83850-v2 and 93450 drives:
[QUOTE]
No pin lifting or epoxy removing needed anymore! Just solder anything on the back according to this picture.
Also if you got status 0x52 instead of 0x72 with the "1,8V-method" this should do it. I already dumped 4 drives with this method without any issues.
-switch in pos 1
-power drive
-start Dosflash --> SPI should get recognized with status 0x72
-put switch in pos 2
-click "read"
unsolder anything and reconnect the lines that have been cut.
[/QUOTE]
News-Source: MRA on XBH
Discuss this news item on our forums: forums.xbox-scene.com
Back to the news-page
| |
|
|
|
|
|
Add X-Scene on:
|
